Silencer adaptors and Muzzle Breaks |
Short Delrin Muzzle Covers |
|
They are 2” or 3" long and 0.7” in diameter and secured to the barrel with a grub screw. If you’re using a scope, then remove your front sight and fit one of these, they look great!!
2" £7
3" £8 |
 |
 |
Silencer adaptor |
|
The mail order of silencers is now banned in the UK and finding a silencer to fit your Crosman in the local gun shop won’t be easy so here’s the answer. A ½” UNF male thread silencer adaptor that will slip over the end of your barrel and fix with a grub screw. You can now fit any silencer with a female ½” UNF thread. They come complete with thread cover and are available in either black delrin or polished alloy (please note that the delrin adaptors are better suited to shorter, lighter silencers). They will fit the 2240/50/60, 2289 and the AS2250XT/King Rat.
Silencer adaptors now come supplied with allen key for fitting.
Price £18
|
 |
 |
Muzzle break |
|
These breaks are 4” long and push fit onto the end of the barrel with grub screw fixing. They are available in black delrin and polished alloy. Will fit 2240/50/60, 2289 and AS2250XT/King Rat.
Muzzle breaks now come supplied with allen key for fitting.
Price £15
|
 |
 |
Grips and Stocks |
Wooden Grips by RB Grips |
|
|
Hand finished, oiled walnut right-hand and left-hand Sportsman wooden grips for the 2240 pistol. They look great and feel very comfortable in the hand and have a small thumb-rest and finger grooves.
Price £30 per pair |
 |
|
Crosman Black Plastic Pistol Grips |
|
 |
Standard grips.
Price £7.50 per pair |
Walnut grips for the 1322/1377 pump pistols |
|
 |
These grips come as a 3 piece set including grips and pump arm. The pump arm is much bigger that the standard plastic ones giving a much better hold for pumping and includes a finger groove to stop you pinching your fingers. Comes complete with fixing kit ( instructions, punch, extra pins and brass grip screws). These grips look and feel fantastic
Price £48 per pair |
 |
Walnut ambi grips |
|
 |
These Walnut replacement ambidexterous grips are excellent value for money. They look great and feel much better than the standard plastic ones.
Price £25 per pair
|
Custom 1322/1377 Pump Forearm |
|
 |
This forearm is much chunkier than the standard one making it much easier to use. If you are thinking of fitting a shoulder stock to turn your pump pistol into a mini carbine, then fitting this forearm will finish the job off. It comes complete with a pair of pins for fitting. (please note that the colour is a very dark green and not black).
Price £10 |
Shoulder Stock |
|
 |
Original Crosman 1399 stock. Will fit 2240 and pump pistols to convert into mini carbine
Price £18 |
Wire Stock for the 2240 Pistol and the 1377/1322 Pump Pistol |
 |
These stocks are fantastic quality made from aluminium. The wire section is made from solid bar, the butt plate and both front and rear bosses are also machined from solid alloy. The unit can be disassembled with 3 screws for easy storage. They have a semi matt sprayed finish which is hard wearing and durable, and is excellent quality. They easily fit to the pistols by removing the 2 rear screws and slotting it in, in place of the end cap to make your pistol into a handy mini carbine
Price £40 |
 |
 |
Seal Kits |
 |
Complete seal kit for the 1322 (.22) and the 1377 (.177) phase 3 and the 2289
Price £8
|
 |
Complete seal kit for the 22XX series of guns. Contains .22 bolt seal, transfer port seal, valve body seal and CO2 12gram capsule seal. Will fix any leak you may get on your gun
Price £6
Also available: exhaust/stem seal
Price £3 |
 |
Complete seal kit for the AS2250XT/Kingrat
Price £8
|
 |
Bottle seals for the AS2250XT/Kingrat. These seals seem to be the most common O rings that need repacing on this gun. Buy a pair of them without having to buy the whole kit.
Price £2.50
|
 |
Valve stem for the 1322/1377 and the 2289
Price £3
|
 |
Valve stem for the AS2250XT/Kingrat.
Price £3
|
Custom Parts |
Trigger shoes |
|
 |
The trigger shoes are now available in two different types, both types are roughly the same size. . These excellent quality shoes really make such a difference to the feel of the trigger.
The custom fit ones are hand made for the perfect fit and are available in both alloy and brass. To gain the perfect fit, you will need to file the fatter section of your brass trigger blade. They fit with two grub screws.
Price £10 |
 |
The other type of trigger shoes are easy fit ones.
These trigger shoes are 18.5mm long and 12.5mm wide and can be fitted to your trigger blade in seconds with the supplied allen key. Made from aluminium and anodised in matt black and matt silver. Just slip them on your trigger and tighten the screws. They fit the 2240, 2250, 1377, 1322 and the AS2250 King Ratcatcher, plus some of the older models with similar trigger blades
Price £10
|
 |
Hammer and Trigger Spring Guide Set |
|
This kit contains a delrin hammer spring guide and a trigger spring guide
together with a pair of quality replacement springs. The hammer spring is slight
ly stronger with more coils to give a better feel and the trigger spring is
lighter. When fitted, they give a lighter, crisper trigger release feel and a
smoother cocking action.
Price £10 |
|
|
Crooked Barn Ultimate Bolt |
|
 |
Screw-in blued steel bolt handle with extended probe. Fit one of these to your breech to push the pellet past the transfer port for better flow of CO2 which results in better consistency. Comes with O ring.
Price £15 |
LPA MIM Rear Sight |
|
 |
This is an excellent fully adjustable rear sight designed to fit the dovetail machined in the Crosman steel breech. It is a top quality unit made in Italy, fully adjustable for windage and elevation, just slide it in and tighten the grub screws with the included allen key. It also comes with a neat little adjustment tool
Price £26 |
 |
Custom 1322/1377 Barrel Band |
|
 |
Fit one of these if you want to fit a longer barrel to your pump pistol. Made of plastic, it is a direct replacement so easy to fit. ( please note that this barrel band has no front sight fitted to it).
Price £5 |
Paintball CO2 Tank to Airsource Adapter |
|
 |
Fit this adapter to your AS2250XT/King Ratcatcher and you can use a re-fillable paintball tank to power your gun. Use a 3.5 oz tank and retain the plastic stock or use a big 12 oz tank and a tank butt-pad and have over 500 shots per fill. Fantastic quality, anodised aluminium. Adapters will accept bottles with pin or on/off valves.
(no bottle available yet).
Price £33 |
 |
|
Front breech screw and allen key |
|
 |
If you are going to take your 22XX gun apart you will end up removing the breech, and you might just have trouble removing the front breech screw. Now can can easily remove it and have a replacement screw.
Price £2.50 |
Brass safety bolt |
|
 |
This replacement safety is made from solid brass and is finished with a painted red band. Fit one of these to your gun for a great look and feel. Will fit the 2240/50, 1377/22, 2289 and the AS2250XT/King Rat and the SSP250
Now available in alloy.
Price £10 |
 |
Scope mount |
|
 |
The cheapest and easiest way to fit a scope or red dot to your gun. Place the 2 mounts over your barrel and tighten them in place. They will fit the 2240/50/60, 1322/77, 2289
Price £8 |
Benjamin/Sheridan EB Pistol parts |
Inter mount |
|
 |
If you want to fit a scope or red dot on your EB pistol, then this is the only way to do it. It’s a 4-piece rail that sits on the barrel and screws in place. Very easy to fit.
Price £15 |
 |
Silencer adaptor |
|
 |
This adaptor has been specially made to fit the EB pistols and is made from anodised alloy and has a accessory rail underneath to attach either a laser or flashlight. It is a push fit and fixes in place with a grub screw (allen key supplied) It has a ½” UNF male thread, so you can fit a wide range of silencers . Please not that this adaptor has to be removed to replace the CO2 cartridge.
Silencer adaptors now come supplied with allen key for fitting.
Price £20 |
 |
 |
One-Piece walnut grip |
|
 |
This grip is made from walnut and has a hand oiled finish. It transforms the look and feel of these pistols. It has finger grooves and a slight thumb shelf and is available in right-hand only
Price £35 |
 |
Trigger shoes |
|
 |
These trigger shoes are 18.5mm long and 12.5mm wide and can be fitted to your trigger blade in seconds with the supplied allen key. These excellent quality shoes really make such a difference to the feel of the trigger. Made from aluminium and anodised in matt silver. Just slip them on your trigger and tighten the screws.
Price £10 |
As with any changes, disassembly and reassembly, modifications and/or alterations of an air gun or any of its parts, there is always the possibility of compromising the operation and safety of the air gun. It is important to make sure all parts have been fitted correctly and that the safe working of the gun has not been compromised in any way. All parts are tested in a test rig, but it is impossible to say how they will perform in another gun fitted by a third party
By accepting and using these custom parts, you and you alone accept any and all responsibility in the operation and safety of the gun or guns that these parts are being installed, and will hold no other person or persons responsible.
